Description

Kit that includes a solar LED projector with an integrated high-power lithium battery, a solar panel, a remote control and hardware for its installation. It incorporates luminosity sensors. Ideal for automatically lighting any outdoor area without the need for electricity.

Operation:

You can use the LED projector connected to the solar panel or independently, in the latter case it does not work in automatic mode, and is turned off or on from the remote control.

– Automatic mode: This mode is only possible with the solar panel permanently connected, in this way the LED projector only turns on when it detects a brightness lower than 50lux, otherwise it will turn off. In this way it turns on automatically at night and turns off during the day.

– Manual mode: By pressing the ON/OFF button, the LED projector turns on and pressing it again button, the projector turns off. Regardless of the ambient brightness.

Remote control:

ON/OFF button: the LED projector turns on and by pressing the same button again, the projector turns off. Regardless of the ambient brightness.

OFF button: activates/deactivates the light sensor mode.

3H button: activates the LED projector for a continuous period of 3 hours, and repeats the process on successive days.

Button 5H: activates the LED projector for a continuous period of 5 hours, and repeats the process on successive days.

Button 8H: activates the LED projector for a continuous period of 8 hours, and repeat the process on successive days.

Maximum brightness button: Increases the brightness in intervals of 20% until reaching 100%

Minimum brightness button: Decreases the brightness in intervals of 20% until reaching 20%

*Autonomy 10 hours full charge.

*Long panel-projector cable: 4 meters. p>