Description

Kit that includes a LED solar projector with an integrated high-power lithium battery, a solar panel, a remote control and hardware for its installation. It incorporates light sensors. Ideal for automatically lighting any outdoor area without the need for electricity.

Functioning:

You can use the LED projector connected to the solar panel or independently, in the latter case it does not work in automatic mode, and it turns on or off from the remote control.

– Automatic mode: This mode is only possible with the solar panel permanently connected, in this way the LED projector only turns on when it detects a brightness lower than 50lux, otherwise it will turn off. In this way it automatically turns on at night and turns off during the day.

– Manual mode: By pressing the ON/OFF button, the LED projector turns on and by pressing the same button again, the projector turns off. Regardless of ambient light.

Remote control:

ON/OFF button: the LED projector turns on and by pressing the same button again, the projector turns off. Regardless of ambient light.

OFF button: activates/deactivates the light sensor mode.

3H button: activates the LED projector for a continuous period of 3 hours, and repeats the process on successive days.

5H button: activates the LED projector for a continuous period of 5 hours, and repeats the process on successive days.

8H button: activates the LED projector for a continuous period of 8 hours, and repeats the process on successive days.

Maximum luminosity button: Increases the luminosity in intervals of 20% until reaching 100%

Minimum luminosity button: Decreases the luminosity in intervals of 20% until reaching 20%

*Autonomy 10 hours full charge.

*Panel-projector cable length: 4 meters.