Description

This Autotest LED emergency light provides backup lighting during power outages, providing visibility in emergency situations.It is made of ABS (acrylonitrile butadiene styrene), a shock-resistant material.It incorporates SMD5730 LED chips that guarantee clear and intense lighting, even through the self-adhesive sign, with a luminous flux of 200 lm and a cold white tone (5000K).The light is not permanent, but turns on automatically in the event of a power outage and has 3 hours of autonomy.Through an LED indicator it is possible to know if the device is working (green colour) or if the battery is charging (red colour), allowing easy monitoring of its status.Autotest emergency luminaires not only meet the basic requirements of standard emergency lighting products, but also include the Autotest automatic self-test system. AutoTest products only require visual inspection as the integral luminaire status LED reports the operational status of the luminaire and the type of fault, should a fault have occurred.The Self-Diagnostic feature is factory preset with no adjustments allowed and serves the following tests:- Real-time online monitoring of battery and lamps – identifies battery charge, disconnection and lamp failures.- 60-minute self-test and discharge after installation and AC power for 24 hours.- Self-test and a 30-second discharge once every 30 days, after AC power has been supplied for a minimum of 24 hours.- Self-test and a 60-minute discharge once every 180 days, after AC power has been supplied for a minimum of 24 hours.- Self-check and a 60-minute discharge once every 365 days, after the alternating current has been supplied for a minimum of 24 hours.Installation:This emergency light can be installed in two ways:Recessed: Replacing an old luminaire or making a new hole. Once the wiring has been cut and connected, the luminaire is easily inserted and fixed using its two side fins.Surface-mounted: It only requires installation with the wiring connection on the wall or ceiling, in a simple and fast way. The frame that the luminaire has for recessed installation must be removed before surface installation.Includes all the elements necessary for its assembly.